lol ya i know what thats like. i dont like holding high rpm for very long time. i try to cruise at 70mph at 3k. but even that (3k) is high for me...
i need to make me one of those bars on my rear end. for drag racing. too much for me to make a 4 link. plus i wanna keep it looking stock, so if...
i think mine is making around 130-140..... according to my butt-dyno! she can scoot i once held a camaro on the freeway, rolling at 60. hit the...
sounds like she good now
pull the idle screw all the way out and check the O-ring for cracks. u may have over looked this part. i've seen this cause a surging idle. its...
the pedal height should be set. its the rod length and when the pedal contacts and pushes the rod in -this is what makes the difference. unless...
adjust it so that there is minimal freeplay as u go to press it. make sure to leave a small small gap. like 2-3mm. thats how i did mines
sounds right. if the car is running off the starting fluid, then it seems to be a "fuel delivery" issue. nothing in the jets/carb is clogged?...
if it was fine before the change, i would start with what u replaced. how does the pedal feel?
call LC engineering. tell them what u are planning to build. they should be able to lead u in the right direction. they also have pistons 12.5 : 1
idk. im not too familiar with carbs lol sorry lai i guess some people call them chokes or venturis but they do the same thing, taper off or...
chokes/venturi's ?
.... not to poke at a dead horse, or get off topic but..... i was saying that because the hemi chamber of the 20r and early 22r heads are...
get a pressure gauge for it. so u can see what its doing nai. dont guess. umbeeya
if using a 22r Early engine with 22r hemi head -the 20r head will have same compression ratio. will need dome piston if not already equipped....
Outlaw cam!!!!! lol jk na, like Xs said, call LC. they will help u pick the right one for ur set up, for what u want/plan to do.
:waytogo: solid chelu!
do this. its the simplest easiest fix. if still having issues, most likely its in the booster.
:waytogo: live and learn. now u know how. i ran into the same issue. but i just wanted to reseal the pan. bearings were fine. i learned the hard...
nice. well not really but, u get what i mean. good u caught it in time before any major damage. on the coolant.... thats what mine was doing -...
Separate names with a comma.
