So i'm replacing input shaft and output shaft seals on a 92 w55 transmission, the two seals look to be of similar design, just different sizes....
I've heard that some 22re's do and some don't. Mine is a 92 22re base with no tach. And yes, if my truck had a tach, i would know whether it has...
Don't mean to hijack, because might help the OP as well, but how do I know whether my truck is one of the lucky ones pre-wired for a tach? Other...
I had a feeling that was the case. Are there some that actually are 60.1, or is this just erroneous information floating around the internet?
So I've been looking around and I've seen both center bore sizes listed for this generation of truck. It looks like most Toyota/Lexus/Scion...
Thanks guys, I was able to find the links to some others that did it. I don't think I'm a fan of how much it takes up the already little space...
So I need to replace my transmission seals. This is new to me, so after some online research, it looks like the seals themselves are about the...
Mine does the same. Once you pull off the dash, take a look at where the dash pad attaches to the cab just up under the windshield. On mine it...
So did I miss something on the 4runner back window? Am I to understand you're planning to integrate this into the back of the cab? I would love...
I have seen them on 4runners, but I don't think my base pickup has one. I'll have to check.
Oh, man. I had my dash apart last night and I forgot to take a picture of how I did mine. Do you know what I'm talking about, though, just...
Does this help http://i93.photobucket.com/albums/l51/asortofhobbyist/Mobile%20Uploads/IMG_20161028_165610_zpsk1qciab4.jpg If you have the plastic...
I don't have any right now, (and unfortunately no before pictures) but I'll snag some when I get the chance. I've been meaning to take a trip to...
I think it's supposed to mount into the bottom of the dash pad above the glove box. I have a 2WD base so there was no where in the dash pad to...
Thanks uncleJesse, that does back up what I've encountered. I don't know about single DIN setups, but here is what I found. If you have the...
Thank you for sharing this. All the other links I've found to this point have been broken.
Here’s a rundown of how I wired mine as far as I remember. You should have the switch, the plug for the switch with two wires (green and green...
They mount to the radio just fine, and where it puts the radio face is about 1/2" behind the bezel. There's not 1/2" of space on the bracket to...
Yeah, they are labeled R and L and they fit on the radio great. When I pulled the stereo from the Sienna, I put the brackets from the 4runner on...
So the po had a really sketchy radio/cassette deck that was mounted in with plastic brackets which were broken,and just hanging in the slot when I...
Separate names with a comma.
