Not low enough to camber, had min to where when I hit a bump it would run the inner fender and it wasn't cambered. You need to add wishbone...
Like TRUCKACTION said, I'd go with drop spindles. I used my stock uppers and lowers and modified them. Budget is going to be your deciding factor....
I've got a thrush turbo muffler in mine. But I also don't have a cat and only about 2' of exhaust after the down pipe. What exactly are you...
Just a shot in the dark but maybe a bad connection in the main fuse box? It can be corroded or maybe just loose from 30 something years of...
Our pups are like our kids. They are spoiled rotten and get everything they could ever want. Sorry to hear you had to put her down. God speed mrs...
Love the drawing, I know you always have cut out the inner fender well but what holds it together when you put it together? Just the dense bolted...
I haven't done the clutch flip yet, and yes we both know the body drop is coming but that's next years project. My goal for this year is to have...
Few photos from today: [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] I didn't get any photos of the setup compressed but when it's compressed it is...
Would love to buy some cando's, buuut, here's the deal. When I told my wife I was going to BUILD a mini she said "ok, but you have to build it. No...
Did you have problems on your last build with the clutch hitting the wheel tub? Was going to start tearing mine apart this weekend to get it...
Alright guys I'll post alittle update since its been a while, I get into the build and everything else slips my mind. Although I do take photos of...
Yah man for sure, if you hit any snags let me know. It is def a PITA with very little room to work with but there aren't many 3vze builds out there.
Looks good man!!! That's about where I am with my build right now. I haven't updated in a while but I know I need to. :waytogo:
What guage metal you use for your tubs? Might hit mine this weekend if I can get the suspension set up. Again thank for the help the other night...
Appreciate the reply guys. Was going to tackle this today but rain will delay my progress yet again. If it stops today I will try pulling it...
Got this one in a pm: few others where sent the same message as well.
Going to be using my stock lower control arms and was wondering what bolt size to use to replace where the torsion bar is. Similar if not the same...
Hey Gary and Litneon (forgot your name :/ ) can you guys post up some pics? Just kinda need some clear reference lines to go by. Started setting...
Looking for reference photos of front bag setups and how the inner fenders are cut. I got some from a few threads but most are hard to grab...
I've got the 3vze, but can you post up some pics I can use as a basic reference? I called a company near me called colliflower and they have flex...
Separate names with a comma.
