I use em for same thing on my motorcycle. they work pretty good and cheap!! nice job
Getting ready to rebuild my entire front end. I was just curious if any of you guys replace the control arm bushings along with everything else?...
I know allot of people on here are wanting the dual storage compartment center consoles from pickups and some 4runners. Just thought I would share...
Just burnt my 3rd one! FInally figured out it was the resistor pack on the motor. Got a new resistor pack just need to replace the fan switch,...
lol, bet thats fun in parking lots and what not:D
I have had dozens of times I could of used it in the last week!! I'm going to look into one! Are they illegal?
I need a train horn!!!
^^what he said..hardest part is getting the angle right on the input shaft on the tranny to into the clutch..put a jack under your tranny it will...
check fluid level in reservoir..that float on the cap will trigger the light if fluid is low..just saw you have no electronics on reservoir, it...
well 2 years later.....another stuck autoloc solenoid!!! So tired of this..I wish I could clean these up, besides being dirty and sticking they...
Those PnP kits are all the same..just buy yourself a $30 kit off ebay..my first kit was from ebay..bought it probably 5 years ago..they still work...
^^ I don't..and im interested!! let me know what you have, how much etc
I love your yellow truck!! cant wait to see what else you do!
I've read your posts about the PW convrsion you did...one thing I need to do is relocate my shaved door solenoids, i used to have Mr Gasket 15lb...
i like those rims! nice find!
Thats what I was thinking I found this..an early taco but its pretty much the same Toyota Tacoma power window installation
I'm getting pretty impatient trying to find a set of reg cab sR5 doors/door panels with power options. So I'm thinking of piecing together a power...
speedo cable if you have one..cables too
^^I didn't have any holes on mine, hmmm at least I dont remember, been such a long time since I put speakers in the doors
just drill wherever you want, mine are about in the middle...get some grommets, you can find them at harbor freight pretty cheap, as long as you...
Separate names with a comma.
