Watch this, it covers a lot.[MEDIA]
Not a 1980 like this,look at the TOYOTA size difference, these are 5 inches tall.I think the 1979-1983 was the same. [IMG]
The two spots on your valve cover are a way to route blow by gas to the intake. The one with the breather went to a port on the base of the stock...
I don't know anything about your truck ,year,model,2 x 4 or 4 x 4. My truck the clutch pedal should have 1-5mm play in it(.04-.2") and the pedal...
new decals
northern entrance Blue Ridge Parkway,Virgina
factory gauges
factory am/fm/cassette,AC,oil and ammeter all work
before paint,factory stripes
Clock or tachometer were optional in 1980, one or the other they went in the same place, I got the tachometer with the full gauge set.Ammeter and...
Stock 14 inch w/original trim rings and hub caps. 1980 SR5.[IMG]
Take the light bulbs out to find a short.To stop blowing fuses while you trouble shoot put a light bulb jumped to replace the fuse, about the same...
I think you need a new slave.
DO you have no clutch or it won't release, if it won't release check your master/slave combination , it's usually the slave. New master about...
Here.http://www.yodajims.com/
There should be a tag on it somewhere, try here.http://www.yodajims.com/
Take the secondary throttle diaphram apart and put the spring on the other side of the rubber part.Now when you push the throttle all the way down...
Check your carb. float level through the window in the front, should be between the tabs in the middle of the window.
Try here http://www.yodajims.com/
Separate names with a comma.
