Search Results

Search Again
Page 7 of 10
  1. Litneon
    Post

    And here.... we... go.

    Yep. You could simplify and get rid of that setup altogether and go with an adjustable solenoid, but you'd have to do some research to see what...
    Post by: Litneon, Nov 18, 2014 in forum: 1989-1995 Build-Up/Project Threads
  2. Litneon
    Post

    And here.... we... go.

    Tell me again the benefits. Specifically? I stated the "purpose", then stated why I think the purpose isn't that big a deal. The only time...
    Post by: Litneon, Nov 18, 2014 in forum: 1989-1995 Build-Up/Project Threads
  3. Litneon
    Post

    And here.... we... go.

    Yep. And degrease it, then torch the crap out of it to try and burn the oil and carbon type stuff out of it. It welds ok, but like cast... good...
    Post by: Litneon, Nov 17, 2014 in forum: 1989-1995 Build-Up/Project Threads
  4. Litneon
    Post

    And here.... we... go.

    I deleted the PCV altogether. It's not really required unless you have state inspections (as far as I know). You can vent to atmosphere through...
    Post by: Litneon, Nov 17, 2014 in forum: 1989-1995 Build-Up/Project Threads
  5. Litneon
    Post

    And here.... we... go.

    So, you're saying I was there the right time of year... I really did enjoy the stays up there. Very beautiful. I would definitely bring my...
    Post by: Litneon, Nov 17, 2014 in forum: 1989-1995 Build-Up/Project Threads
  6. Litneon
    Post

    And here.... we... go.

    Ha! I haven't even messed with it yet. It's on my bench, I'm kinda waiting for a time when I don't have much to do and it's too cold to play...
    Post by: Litneon, Nov 16, 2014 in forum: 1989-1995 Build-Up/Project Threads
  7. Litneon
    Post

    And here.... we... go.

    I could be wrong, but in the research I did, I found that the AC amplifier needs the tach signal to determine whether the clutch should be engaged...
    Post by: Litneon, Nov 16, 2014 in forum: 1989-1995 Build-Up/Project Threads
  8. Litneon
    Post

    And here.... we... go.

    Yeah, but you have to send a tach signal to the board. I tried just wiring it hot all the time, but it didn't work with that.
    Post by: Litneon, Nov 15, 2014 in forum: 1989-1995 Build-Up/Project Threads
  9. Litneon
    Post

    And here.... we... go.

    But the AC doesn't work? I think they are tied to the same tach signal wire. For the speedo, you'll have to check the sensor wiring. It runs...
    Post by: Litneon, Nov 14, 2014 in forum: 1989-1995 Build-Up/Project Threads
  10. Litneon
    Post

    And here.... we... go.

    You have to supply the amplifier with a tach output from the MS. You'll have to configure one of your programmable outputs to a tach signal, then...
    Post by: Litneon, Nov 13, 2014 in forum: 1989-1995 Build-Up/Project Threads
  11. Litneon
    Post

    Door Speakers

    I can't remember, I think there were more pics of them in my build thread. I'm no fiberglass guy either. I've learned all of these skills as...
    Post by: Litneon, Nov 12, 2014 in forum: Interior/Electronics
  12. Litneon
    Post

    2 Toyota IFS 7.5" Third Member Chunks 86-95 $100 each shipped

    Is there an LSD or locker installed in either?
    Post by: Litneon, Nov 12, 2014 in forum: Parts and Accessories
  13. Litneon
    Post

    And here.... we... go.

    Yes, I have them hidden behind the intake plenum. They are both still there. The fact that the factory ECU is gone hasn't changed anything as...
    Post by: Litneon, Nov 12, 2014 in forum: 1989-1995 Build-Up/Project Threads
  14. Litneon
    Post

    ECT - Engine Coolant Temp sensor

    Third gen 4runner bumper?
    Post by: Litneon, Nov 12, 2014 in forum: Maintenance/Repair
  15. Litneon
    Post

    ECT - Engine Coolant Temp sensor

    True, forgot about that. Also, there is also a temp switch for the cold start injector located next to the ECU sensor.
    Post by: Litneon, Nov 12, 2014 in forum: Maintenance/Repair
  16. Litneon
    Post

    ECT - Engine Coolant Temp sensor

    Sensor is one of the two threaded into the front of the intake/coolant housing right in front of the thermostat, and below the TPS. The screw...
    Post by: Litneon, Nov 12, 2014 in forum: Maintenance/Repair
  17. Litneon
    Post

    Door Speakers

    Spacer... My 5 1/4's are about 5 1/4" deep (maybe). [IMG] [IMG] [IMG]
    Post by: Litneon, Nov 12, 2014 in forum: Interior/Electronics
  18. Litneon
    Post

    Engine bay pic request

    Of course, I've changed the color of the silicones since then...
    Post by: Litneon, Nov 11, 2014 in forum: Engine/Drivetrain
  19. Litneon
    Post

    Engine bay pic request

    Haha! I've posted mine up a few times... It's the first pic to come up when I search Yahoo for "22re MegaSquirt". :D
    Post by: Litneon, Nov 11, 2014 in forum: Engine/Drivetrain
  20. Litneon
    Post

    ride height uneven

    Whaaaat? Read my comment again. If it was level before, then the only way for it to change would be uneven height blocks or uneven adjustments...
    Post by: Litneon, Nov 3, 2014 in forum: Suspension/Chassis
Showing results 121 to 140 of 196 Next >
Search Again
Page 7 of 10