Updates to the project stripped interior [IMG] Killing some noise [IMG] Fresh carpet [IMG] Original interior [IMG] and red LED's in the...
Sweet! I just had to treat my floor board, no rust through. The clutch master had leaked and made a mess out of the floor. now to sound deaden and...
did you use a sealer or rust converter product such as POR15 or equivalent? if not the rust will return.
If memory serves correct its approximately 2.5 to 3" wider.
Advanced timing,and or running too rich...
I also have the original owners guide with all the warranty info.
From the 1987 owners manual (yes I have my owners manual): Short Wheelbase: 11.4 Gallons Others: 17.2 Gallons
Do it yourself spray in liner Al's Liner. DIY Truck Bed Liners! can be bought right there on the island (love Hawaii...Really need to visit again)...
I can confirm the intermediate shaft IS different.
Good luck. Let us know what you find.
If it was running prior to this problem I would say a valve adjustment is not an issue. As Malessohomegrown says, check for spark...I have used a...
Thanks everyone.
what was the conditions leading up to this, did you drive it, shut it down then go to restart? As long as you have fuel spark and air it should...
i'm working on this swap as well in my '87, I believe you need the complete steering shaft all the way to the gear box, the one I picked up at the...
The one on my '87 is 33.25" wide by 5" tall. Its on an American bed tailgate.
a couple more pics.[IMG] [IMG]
Thanks! approximately4" front, twisted the torsion bars, 3" blocks in back...Rides good, slight stiffness in the front, but the A arm bushings are...
Motegi MR116 17X7 +40mm offset 205/40/17 tires.. [IMG] [IMG]
static drop and new shoes update:
Compression specs 22R and 22RE: Between 142 psi and 171 psi with a variance of less than 14 psi.
Separate names with a comma.
