Hey, just got done watching the vids and listening to the audio. Doesn't sound like valve tick to me. It almost sounds like a really bad exhaust...
Well, these swaps are typically being done to 4x4's and they need the 2" body lift or hood scoop to clear the stock intake. A cowl would probably...
Yes, you will need a hood scoop or a 2in body lift for this to work. Also, a custom intake will do the trick. All the information that you...
What cam profile are you running? All downdrafts will bolt on to your stock mani with the right adapter plates. Sidedrafts will work with the...
Nook, your my best friend...we think a lot alike. I too have never used a regulator or even an aftermarket fuel pump on any downdraft weber....
I'm not sure where you got that information, but the stock 20/22r engines does NOT have a regulator on carb applications. Nook is right, the...
Nice truck:drool:, I saw it in the customer rides of LC Engineering Newsletter.
Yea, I'm referring to the carb. Webers are always a good choice, but it all depends on what you want. 32/36 is a good stock replacement because...
I've run 4.10s in all my 2wd's with good results. Not sure off hand where these rears can be found, but this site helped me a ton when going to...
More full size pickups than anything. A lot of paniolo's over hea
What primer and what tip are you using in your gun? What kind of gun do you have? Also, I hope your not painting part by part or else your...
Bra, wea you went? I got my engine hot tanked, align honed, cold tanked the head, and resurfaced for 100 Bucks. If you wanted to balance, it's...
Like Nook said, but there is one bolt that fastens the oil pan to the oil pump, so you'd have to take that off. Haynes probably meant that.
Actually, forget I said that...hahaha...Yea this could be the problem of a rough idle. Sometimes what happens is unburnt gasses escapes the...
I'm not 100% what the line going under the manifold is, but the second is the pcv valve as others have stated. Yes, you can put an air filter...
First of all...WOW!!!!!! Never expected this much replies. Personally, I've never used a regulator mounted after the carbs in all of my dual...
Not really. Its pretty obvious it won't work. And why???? Just swap one in...its easier than you think
All "W" series transmissions will interchange with each other. They are all built almost identically interior wise (minus gear ratio) only...
O, and i'm pretty sure that something else is giving you idle trouble cuz all that thing does is...well...vent. And its not a sensor. I'd look...
PCV...Positive Crankcase Ventilation. Yes you can buy a new one at almost any parts store for 5 bucks.
Separate names with a comma.
