Yeah course.Use a bell housing to motor bolt to match.They have to be long though to go through the engine mount.
17's I use old head bolts
That would be the speedo cable.The front part of the trans is the bell housing which is sealed off from the rear that houses the tranny oil.Not a...
Saipan Chelu?Welcome.
pretty sure drive shaft lengths are the same.I can remember going from a 7.5 to an 8 without changing drive shafts.
I can't remember exactly but once you flip that fuse box over you unbolt like a 10mm and it slides out.Something like that. You are on the right...
one more thing get a test light and test the guage fuse.If no power there you gotta trace it back.
Check the relay that is above the fuse box on the drivers side kick panel.
20r early 22r are interchangeable.I'm sure there is a way to make it efi if you wanted to.
Looks nice bro.Did those rims come with center caps.Didn't see the front ones in the pic.I saw something cool a couple years back where this dude...
So how did you run the o2 sensor that's closer to the motor back to the cat.Extended the wires?
You have a couple of options on that earlier motor.20r's are also the domed piston style so if you found one of those you could use parts off of...
How about the nissan Hardbody?
The auto drive shaft is a different length then what you would need.I believe the auto trans is a bit longer giving you a shorter drive shaft.If...
Gearratiosanddiffs
I say if you plan on running a 5 speed swap out your third member from the 5 speed doner truck.It will be worth it.Here's how you identify the...
Do the doug thorleys have the o2 plug anywhere on them and if so is was it connected after the swap.There are two on the stock set up.Here on Guam...
I can't remember but are the early Tacos on the opposite side?
Motor wise yes it will work but when the time comes to swap out your trans to a 5 speed you will need to use the trans mounting plate from the 92...
Yessir it will.Is the 88 a 4 speed?
Separate names with a comma.
