Can you measure the O.D. of the springs for me? You got me thinking about the upper a arms and how they turn in to the ball joint. Thanks for...
Thanks for the info, I'm using the cando uppers and lowers and want a coilover.
What is the compressed and extended length of the front coil overs. Do you know what series QA1's they are? The truck looks awsome and I'm...
I'll get everything off and text you some pics of it and call you when I get it off. I'm pretty busy next week so I'll get to it as soon as I can.
I've got a 2wd 4runner that I'm parting out if you need these parts. Give me a list of everything you need.
I've done it both ways. The dashpot slowly closes the TB so the engine burns the fuel completely. It's really not that big of a deal to run...
Slacker, Do you make those rear flares in the pic of the blue ex cab?
Just go to the parts store and get some green plastigage. You have to cut a piece the width of your bearing and torque the bearing cap with the...
A W56 is a 4x4 transmission, you need a W55 or a W59. A W55 was in late model 89-95 2wd's and the W59 is for a tacoma, you would need the...
That is a transverse mounted engine, and any 1zz 05 and below had a ring problems(uses lots of oil). You would be better off to use a 2rz then...
That's great, then I could use the mustang II spindle and use the big brake kit I want and still have the same bolt pattern. All I would have to...
Can anyone tell me which balljoints the Cando A arms use.
I really want the coil overs with a stearing rack and big brakes, that's the reason for using the mustang II suspension. Willwood has 11-14"...
I was looking at the welder series front mustang II kits and wanted to have some input from anyone on the forum. Likes or dislikes for using this...
I've got a set that I can clean, test and flow with new o-rings, filters and pintle caps. No need to send them to RC, I'll do them for $100...
I've ran 14psi on the stock injectors with an intercooler, and the afr was fine.
Whats wrong with the injector you have? I test, clean and flow injectors.
Sorry it's all been sold.
You need to finish that thing and take it to SEMA and you will have all the work you could ever handle.
Are you using the auto UZ bellhousing, and if so what are you using for the clutch fork and throwout bearing?
Separate names with a comma.
