I've got them.
Where is the front differential?
You, need a G coded rear axle housing and axles from a 2wd.
I just got a chub when I saw this, where in Mississippi are you located?
Those will work, you can also use mazda Denso 195500-2180's they are a plug and play injector and are 254cc per minute, but are probably too much...
Those will work, it's only 25cc more than the stock injectors. It's going in the 93 right.
If you want to drive that thing back up to Tennessee, I'll swap it out for you. I sure would like to see it.
I still have whats left of that truck, I had a lot of fun with that truck. I have another cab and want to finish it one day. The sunroof is...
Is that also a production piece, if so how much will they be?
I can do a set and you can send me your cores after you recieve them, that way your not down very long. The circut opening relay is above the ECU...
You can have the injectors ultrasonically cleaned and flowed. I could rule that out for you, I can service yours or do a set for you to swap out....
I've got one just like that a few years ago at Hobby Lobby.
You should definitely have your injectors cleaned and flowed, (insert shameless plug here)! Injectors have a tendency to gum up after sitting for...
No custom driveshaft needed your stock one will work. All you have to do is swap bellhousings and go with it. I've put a 82 celica w58 in a 3rz...
Is it a Cosworth?
Twincharged 22re, 2rz, or 3rz would be my choice.
I have a set of these for sale I got a few years ago when this was going on. I'll take $80 shipped for the brackets and the hat bolts that I have...
I would guess valve seals, with it being sitting most of it's life. First do a compression check and that will let you know about your rings. If...
That is your clutch slave cylinder and it has a little nipple cover but it's not necessary.
What is this? It looks like a 4runner/4door cab with a cherokee rear. [IMG] I love the hood on the black one in the first pic.
Separate names with a comma.
