mine runs a little below that.. always has... even when the truck did have a stock fan on...
check a junkyard... they went to the logo in i believe in 92 and before that is was spelled out... or try the dealer...
thats what i do.... if your cat what stolen thats a sign that your truck is to high... if i were you i wouldnt run a cat... unless you are one of...
there should bee some bigger bolts i believe there is two... one that bolted to the front diff cover and the one on the side of the diff... look...
where is a good place to buy front clips from... i have been pondering the same idea on doing an engine swap..
its the twin of my truck... jsut not rusty, wish i could buy it glws...
wow your yards must be crazy... i paid 20 for mine... but mine was a 85... ijust swaped the white chips inside.... and its worked perfect since....
^---- random but anyway.... yea the strut bar is the one that is bent by the bolt holes.. i cant move it anyway i looked tonight and the stop tab...
i am running 15's... i don't want to fab all the work of putting triagle a arms on.. i more leaning towards the modded bar... just seeing if...
got a 91 short box reg cab... just did 3" block in the back with spindles, bj flip, and spacer plate. i am running 15" rims and the bolt heads...
u could try dont a plate flip... put the leaf spring plat on top then u would have to get square u bolts... and get the plates from a 4wd truck...
here is what i got from your question: is that you have a 4wd truck around and you want to take the third from that and put it in your 2wd........
sniff sniff... smells like body drop in here... have you tryed your local salvage yard... or the the c list..
could be your o2 sensor... mine was bad and never set off a light... do you know if your check engine light bulb is still good... to test hop in...
in my 91 it was behind the fuse box on the driverside kick panel... it piggy backs the back side of the fuse panel... it is not as easy as the...
ill get pics later the box with the u bolts said 80-85 lbs... and i look in my chilton manual and it said 90lbs....wierd
so i am lowering my truck 3/3 and i went to lower the rear, and there is like a isolator plate with rubber on top and bottom of the leaf... so...
i just ordered some belltechs from stillen.... cheaper then stylin trucks... cause shipping is only $10 instead of $35
so i have finally decided to buy some drop spindles for my 91... just wondering what brands are the best bang for the buck... thanks
does the gauge pod fit the 89-94 trucks? if so how much is shipping to 54140
Separate names with a comma.
