1) The acronym EGR means Exhaust Gas Recirculation. 2) I didn't see a location in your profile, but if you are in the US then whoever advised...
Good, that's the best way to do it. I have seen some people cut and splice the harness which seems crazy to me. I am leaning towards a post-maf...
Did you try to extend the harness or did you just deloom it and reloom to the new location? I disagree that it's a vacuum leak. A post-maf leak...
There are a ton of fake MSD boxes floating around out there. It's a well known issue among old-school hotrod guys and there are lists of known bad...
Follow the wiring harness to the current O2 and see where it ends. On the California trucks the wiring for both sensors shared the same harness,...
I too have a '94 RE-C truck. The California model had a different downpipe (same basic shape but the flange is different at the cat), the cat is...
Three pin relays have one side of the coil closed to the common, or possibly grounded to the case. Your wiring diagram will show you how the relay...
When swapping throttle bodies did you retain the old cold-start idle valve? Can the engine be killed with the idle adjustment screw?
Load the coil with a battery and check for a closed circuit between the common and switched terminal. Or bin it and replace it with a cheap,...
No, sorry. Just the clutch.
Compression check is done cold. No way to get the plugs out of the head when it's warm. The oiled test would give you an idea if it's likely to...
Ideal compression is 170, minimum is 142, allowable variance is 14. You have a blown headgasket or bad rings. Did you rerun the compression test...
Host them somewhere like Imgur or Photobucket and then link them using the IMG tags.
Dropping with a loosened torsion is different then dropping with a cut/shorter spring. When you cut a coil spring the rate increases and the ride...
Ahh I see now that I read through the rest of your build thread, you got 3/4" drop vs. mono. I was thinking 3/4" drop vs. stock 2wd pack! :doah:...
Bump for a good seller. I got my parts quick and the price was right!
Still have the manifold, everything else is gone!
Thanks man, that is exactly the info I was looking for! How would you say the ride is vs. the 2wd? Did they settle down any further, or was 3/4"...
Is anyone here running 4x4 leafs on the back of their truck? I know the Taco guys do it all the time for drop, and second-gen guys have the...
This is an OEM Aisin clutch, not a cheapo aftermarket. It was one of several clutches that I split and replaced the silicone fluid in. I put a...
Separate names with a comma.
