I'm disappointed that I don't have Jedi level skills to pull this off. Nice work though!
Mine is a BYU bottle opener because I like irony. [IMG]
I've wondered about this as I dig through 4runners in the wrecking lot. I have heard that AC was an add on option, and I've noticed in my truck...
Definitely looking forward to that write up. I thought of doing the same steering wheel swap that you did, but pulling from a Scion, but decided...
Reassembly is the opposite of disassembly. Check your work before putting the complete faceplate back together, though. You don't want to put it...
Once they are flat you can gently push them out through the board. You'll need to desolder a couple of points on the back as well. [ATTACH] Then...
Once you have all the exposed ones done in the board, you need to get behind that display. You'll notice some bent tabs on the back of the board....
You may need to hit the soldering pads with a bit of fresh solder, but that usually depends on how long it took to remove the old LEDs. Place...
Now desolder the LEDs. this is easiest with two soldering irons but not impossible with one.[ATTACH] Pay attention to the cathode side. It's...
The faceplate pulls straight off after prying up the tabs. You'll now need to remove the board. You may not have to pull the knobs at this point,...
So, I promised a write up. You will need your stereo of choice. The 16814 is a good candidate. It fits the dual DIN slot, it is fairly plentiful...
So my truck is an FJ cruiser now. I know this because every time I turn the key the stereo scrolls FJ CRUISER across the screen. [ATTACH] I...
Thanks, I didn't know that. I can definitely resize in GIMP on my desktop, so that sounds doable.
Nevermind, apparently I'm a little girl and turns out I just wasn't trying hard enough. And it didn't break. But I have an SR5 cluster now and a...
I agree with you on the 4dr cab and reg bed. So I looked at some websites and it looks like I was a little over on my estimates, you can probably...
That's fun. Is that a Kentucky plate? They're a long way from home. I spent the wee hours of the morning a couple weeks ago learning all about...
Yeah, I found that the SR5 fuel gauge doesn't drop to E like the base fuel gauge when there is no power. Knowing that, I guess there is a...
I found a way to test the fuel gauge at the yard, so I picked up another cluster. Now I need to try and get the mileage adjusted from 258K to...
So I picked up a 4runner cluster from a local yard, but the fuel gauge doesn't move. Is this a common problem? Should the gauge drop down to empty...
Looks good! You did this today in the heat we're having this week? Stay hydrated, bro.
Separate names with a comma.
