[IMG] [IMG] '86 2WD, No power steering. Hope it helps. Edit: Oh, right. I got here from the top page without looking at what gen this was for....
Set up a pit you can drive over. Get the truck up over it. Load it up. Get under there and look where it rubs. Or you could just look at...
I'll second what burnzya just said. I had a spare alternator from my parts truck when it happened to me a few months ago. That made it all...
Well no wonder I'd never heard of them. I use a W transmission. W56, W55.... And the original poster was talking about swapping one W...
Toyota W transmission - Wikipedia, the free encyclopedia That sounds like someone else's designation, not Toyota, not 2WD.
Here's where it gets interesting. I have a W56, which means first has a 3.954:1 ratio. You have a W55, which puts first at 3.566:1. I've got a...
Uh, no. F code is for a 7.5" differential. G code is for 8".
Well, if it was me, I'd move to rural Maine...
Uh, no. Pablo has a W56, 2WD, 1-Ton.
I don't know if this is tacky or just tasteless, but my makeshift valence didn't really hold up last winter, bumping into snowbanks. I'm wondering...
Yeah, that's the other option. To make the oblong hole, I'll probably try using a chain saw sharpening dremmel bit to cut between two drilled...
Where do I get the part to make these reach each other? I think I need a long version of the thing my index finger is on. [IMG]
There's this tube that wraps around the back of the engine. [IMG] Connects to this thing. [IMG] Which is this, [IMG] and this. [IMG]...
I like big BUTTONS and I do not lie. I had lasik done to my eyes. My big fingers are sausage size....
Play with this: Interactive RPM and MPH Computator Program Also, the first and simplest adjustment to better gas mileage is "change the nut...
My 1/2" socket breaker bar used to be a four way lug wrench. One side I cut completely off at the crossing shaft, and opposite that I just cut...
Toyota DIESEL Engine w/transmission I ran across this and just thought someone might want to know. "Turns over by hand" sounds like bad...
Define "compatible". I've got some belts for an '86. The reel bolts in down low and they have a loop that bolts in up high to hold the shoulder...
Thanks guys.
Here's what's left of Trixie, my parts truck: [IMG] On the one hand, I'd like to overhaul that engine and replace anything and everything...
Separate names with a comma.
