Well. My work here is done. LOL nice job!:D
It's a button on the dashboard that you push so that you can start your truck without pushing in the clutch.
My rims are MSR type 087(Eagle alloys I guess)
Ohhh yaaa. That's what it's all about mang! Here's another: draggin December '11 002.AVI - YouTube
I just made up some drag blocks and went out to film some draggin. It's not the greatest footage because I was alone. Good thing nobody ran over...
You need to do some research about driveline angles. I'm not a mechanic either but you need an angle finder and some shims to fix it IMO You want...
Since it's lowered I would guess it's a universal joint. You could get some shims under the blocks to correct the pinion-to-transmission angle. I...
Welcome to TM!
Ya but you have to get the block and head resurfaced to a very smooth finish for a mhg. You could manage a bit over 300hp or so with a toyota hg...
go to driftmotion.com for 7m parts
I recently used 2011 Camry 17 inch steel rims on my truck. I had to get them for the winter tires. And also I needed 17 or larger to clear my big...
Ya man flush it out with water a whole bunch of times after you use vinegar.
Beefed Taco comes to mind from Customtacos.com he would have a weld in notch. But it's been a while I'm not sure if he's around still. And Cando...
It looks like a bit of a project ey. Do you have any other motors in your posession? Maybe a 22re? You could swap one of those in and not pay for...
Just bagg it. Be safe.
I was in town late last night sliding around in an icy parking lot. Testing out the lsd and drifting around. I had the camera on the dashboard so...
Ya you should be able to bolt on 1 ton brake parts to a 1/2 ton. I would say yes. But I've never done it. Good brakes are awesome to have.
You could have just stuck with all your leaf springs and just de-arched them. All you would need is a torch.
Check that the wire connections on the starter are on there tight. You can just use some pliers on a spade wire terminal to make it fit on tighter.
Well at least you have a good list of what you need to do. It should be no problem for a minitrucker to accomplish all that!
Separate names with a comma.
