Yep, just to the right of the passenger headlight. I doubt the plug got moved, unless someone has done a bunch of engine bay harness work. The...
Intersting thing though... WhiteTrash, MrDinkleman, and YOguyDA, are right. The only point that I take issue with in aaron_sk's response is...
Welcome! Roughly where are you located in FL?
I wouldn't. Only because it's already got the stresses of axle placement on it. Rather than have two double shear fasteners, you'd be sharing...
Really depends on how much boost you want to run. The 315's are probably good for 7-8 pounds... A set of 7mgte injectors are 470's, and are good...
Thanks, the trigger wheel and coil are both from DIY autotune.
^^^^^:waytogo:
Got the turbo back from Precision. They are awesome. Instead of just replacing the O-ring, they sent a whole new center section. Just...
Yeah.
Here's the thing... Since I removed it and installed my big brakes (years and years ago), when hard braking, it will on occasion get a strange...
I removed mine years ago. But lately I've considered putting one back on.
It's only a few bucks more for a quality casting from LC. Mind you, you don't get a cam with it, but the rockers should be replaced with the cam,...
Yeah, if you want to use roll stock, it's really only going to be stronger than the plastic DOT line. It won't exactly look better, as it's...
The old green type is what they were designed to use. Just make sure to use distilled water if possible. Supposedly it helps prevent oxidation...
Yeah, a 3/3 or 3/4 will be plenty low. I ran static at that height for a couple years before I bagged my truck.
I'd start here and work my way down. [IMG]
It's rare to see one that isn't cracked. Good buy!
You bought out Steve? I just got a set of replacement bushings from you a few weeks ago for mine. Not even really sure I need them, buy you guys...
Test confirmed.
What's the 253 out of?
Separate names with a comma.
