I'd just rebuild the 20r you have, but see about getting it bored out for 22r pistons..
Yep^ I tried to do as little cutting and redoing to the factory harness just incase I had to change it back for whatever reason. I even still...
I ran a 4awg to the battery, no fuse though I probably should have. The white wire can go to any switched positive wire, but I had mine hooked...
I simply walked in to napa and asked for one, they had a 75amp in stock and it was only like $65
I suggest you return that alt, and get a basic gm 3 wire. For gm 3 wire alternators, pin 2 on the plug gets looped with the main wire to battery,...
60-72 had the trailing arm design. In its stock form, it puts the power down very nicely. If I ever get aftermarket ones you can have the stock...
100% worth it IMO. I had one with their Livewires and it was like night and day from the stock points dizzy. Way quicker throttle response,...
You can, but why would you want to?
I used the little metal piece off the stock carb and put it on the weber. Doesn't have the same grooves to match up but simply snugging up the nut...
Bump.. Someone please help, I'd like to have reliable heat this winter..
I changed my heater control assembly in my 4runner and cant I can't find where the last cable attaches for what should be the blend door.. I did...
There is a fuel pump relay under the dash on the passenger side of the steering column. In my old truck I took that out (went bad, no replacements...
Strider - V8's are a hole different ball game. I know what your talking about with oil getting past the breather, I experienced it on my sbc 383.....
I ordered a champion radiator fon ebay for my last truck.. great quality and only cost about $150..
I don't know of a kit with a new flywheel, but I do suggest looking at marlin crawlers clutch kits. Very good quality, and reasonable pricing. I...
Check to make sure your power valve is working properly.
Check your timing with a timing light. It sounds like it's a bit retarded.
You could probably do it cheaper than that guy is asking. When I did mine i used the basic stock style cast piston and sealed power rings, with...
Mine had about a 3" drop total on cut springs and blocks. You have to remove your upper bump stop block on front and should cut down the bump stop...
60-66 chevy, as well as 67-72 had them. Definitely do hook up very well. (I own a 61)
Separate names with a comma.
