Wonder what all is done to that engine because it sounded really good for what it is
From whats been said before, a 15" wheel will rub on the control arm or ball joint, 16" should clear. these wheel specs and drop are very tame so...
No sir. I still gotta dig thru the parts bin. I'll send you a message tomorrow
BMW ellipsoids from a 5 series with Amazon LED bulbs. Pic below had HIDs [IMG]
My truck is a 72, this was the pedal that was in it when i got it, truck already had a 20R swapped in. DM me if you're interested [IMG] [IMG] [IMG]
Let me check my box of spare parts. I may have one
Do you need the foot pedal part or the actual metal piece that mounts on the firewall
Also have to mention my tire size is 205/40/17 so its about a 24" tall tire.
5th gear on the W55 with 4.11s is not great. Not sure whats in the dually diffs but 70mph at 3000RPM is terrible. If you decide you want to...
Not much progress going on. Im going to buy some steel and tubs this week to start framing out the bed floor. I'll attack the front end at a later...
All they care about in the US is emissions, you can have the most unsafe POS on the road tho
I do have to say that they put next to no effort into making that engine look any kind of good:lol:
Mid sump pan is needed. Rear sump hits the drag link. Front sump obviously hits the xmember
Yes sir thats essentially the fix!
A lot of guys had to mod the drag link back in the day on bagged 84-94 pickups. They would weld a round bar to it and cut the center of the drag...
Either use resistors for the bulbs or swap the flasher relay for one thats LED friendly. I dont remember how the flasher is on the newer trucks,...
Drill with a wire wheel or just fingers and sandpaper
I literally made my own pedal. Some all-thread and some flat stock
I hope it actually rained. Sucks when you cancel your plans and the weather changes its mind
I have a Lokar universal throttle cable in mine.
Separate names with a comma.
