welcome to the site brother! you have lots of neighboring minitruckers here in san diego... where abouts you reside? we have roughly 15 mini truck...
i found one at the yard... you can find them remanf'd online for a couple hundred bucks but yards will be cheaper. this is my redesigned intake...
looking good man. nice silhouette of your first one.... lol
that i know of they wont work... the width is different on the 4x4's and i believe they will not clear the transmission either since the bars sit...
ive been looking into this myself... but had not really found anyone to do them other than lce and d.o.a. racing. i would really like to send my...
yes it can. minimal gain ive seen has been just under 3/4". most gain ive used with spacers has been 1.5"
no... you plug this one into where your stock one goes. nothing is used from your stock afm. you will likely need to use a larger intake coupler...
the leaks are a very trivial issue with the motor... wouldnt take much more than a day to take care of. the engine bay would gain allot by getting...
that is correct. i have not looked into this yet but the benefits could be very well worth the time to do so.
got this AFM here from a running car that was being parted out. this is the AFM to be used for the big bore intake mod. hard to come by these days...
welcome bro! nice truck... you got lots of hommies up there with trucks.. hope you get into the community.
i honestly would not be against adding a tacoma 95-04 section on here as it truly is still a mini truck unlike the 05+. this section should be...
you have to check your ride height sway bar level and see how "even" the arm is and if its at an upward angle, you'll wanna cut the links down...
its different with every truck... some get between 1/2" to 1" if i use spacers. it really depends on the suspension age and as i said if you use a...
they help with suspension feel, response, and input from the driver. everything tightens up and makes the truck more responsive than with rubber...
22R or RE? all trucks need fuel spark and air to run. make sure you have all three. lack of one will lead you to your issue.
welcome to the site... we do have meets here in socal nearly every month... just keep an eye out in the meets section for future meet up dates. we...
dude! looks awesome! ....... so... what did the butt dyno show as far as improvement in power/torque?
fyi, they may work on the 87 or older but you will need 88+ lower ball joints to run them. the bolt pattern is different.
Separate names with a comma.
