Yea man, you need to do a search. This has been gone over plently. Looks like a supra? mcpherson strut on a truck. I have a hard time seeing...
Nam, with the SC300 trans, you will have to cut the floor really bad because the shifter will probably be at the front edge of your bench seat....
I think I had to bend the inner fender metal a little bit to get the control arm out....:thinking: But thats the least of your problems....
Just keep it simple man. Thats the best forumla for these motors. :waytogo:
Nice.
Stock ride height. Its perfect height to the window if your avarage height, so it all works out. If this shaved ice truck idea takes off,...
Thanks guys. :waytogo: Took both the gas tanks out. Sanded, flushed and painted one, then reinstalled with new hoses and clamps after blowing...
I would start with the gear, (depending on whats in your truck already). For instance, its common for these trucks to have a 3.50 ish or 3.08...
Cool man. My brother just bought one. Theyre sweet as hell. Post pics if you can.
I got one from Levan Auto Parts in Houston... Definatly chinese. Seams line up well enough, but the hinges were welded on shatty and have...
I need a differential housing out of a v6 or turbo 22R truck. 2WD or 4WD it shouldnt matter. The naturally asperated 22R/E differential has...
^ Thanks man. We did pull the differential out of the truck to clean up all the bearing bits in the axle. Since I had a spare 4.11 diff and a...
Nice:waytogo:
My brother Lukes been working on the body... [IMG] [IMG] Rear end did have a torn up bearing, so today we replaced both of them......
going to pull the rear axles out today. Need to replace the wheel seals and check the bearings. Besides that, my brother has pulled the front...
yep. Its the one that they had trouble with. But it is a G code, should be strong enough for what we are planning. People who grossly overload...
Drop spindles, torsions loose, and a balljoint flip. Notice the drop compared to the one above...Tuckin 16's :nana: [IMG]
Use t5 stuff out of a camaro. If you can swap in a 90* v6, you can make a trans mount and have a driveshaft made. Making it way more...
Worked on it yesterday. [IMG] [IMG] I also bought a AC unit thats going to be mounted in the back wall. No need to sweat at work......
Tayler makes extremly nice spark plug wires for the price. Otherwise, the NGK blue ones are pretty sweet too.
Separate names with a comma.
