+1. They are buckets. No master cylinder? Come on, really? He parted it out and then tries to sell the corpse for a grand. Pass! But if your...
84+ suspension and drop spindles. 3 in blocks on the rear. Could go ALOT lower.. [IMG]
You could swap in the 4.3. Its been done lots with the 4wd guys But I wouldnt do it even if I had your parts truck. They dont make that much...
The easy stuff like headers, cams and intakes/carbs are where you will see the best value for the power you'll get. I spent too much money on...
5Ms bolt into a yota no sweat. 7ms just need 5m mounts. I almost did one in mine. Mesured it out, got the motor and everything. Just didnt...
You have an early block. The 20R head will bolt on fine with no problems.
yes
Yep. But mines a 22R pop up motor like yours, (but with a 20R head and a holley 2 barrel carb. Putting fuel injection on a 20R head is not...
I put a carburated cam in Suzuki07's 22RE. Runs very torquey with those new 10:1 pistons in it too :waytogo:
They will stop em. If your want to be flashy, the LS460 and LS430 4 piston stuff could work too, but its just alot more money for parts.
A guy has one on Toyotanation. LS1 T56. fits fine. I bet its fast as hell.
On the nose... [IMG]
The axle, and frame will handle the power fine. Youll need to get creative with your brake setup though. I run 95 LS400 calipers and rotors on...
Im not kidding you. It takes 3 wires to make a 5.0 harness power up. One keyed power, one ground and one to battery power. Give it fuel...
You need a v6 or turbo cyl rear axle housing. G code. Besides that, a supra LSD fits in fine.
Ford. Narrower is better in an early truck.
Reliability----Good, never broke on me yet. I spin it to 7 thousand RPM on the stock short block with no problems... Power, eh. Its no V8. But...
sounds to me like a ECT or IAT sensor is unplugged and out of range. Once the engine goes into closed loop, it think its 40 below zero and...
Ive run 15's on them before, they are CLOSE. Like maybe 1/8th of an inch. So they are depending of what wheels you have. ? I spent maybe 200...
One bolt does, the other has to be moved out like 3/4 of an inch. You can see from the picture viewing the back of the caliper.
Separate names with a comma.
