That sounds like a great resource. Thanks!
They’re quite hard to find. The main difference that I can see is that the bolt pattern is different. Using a later year might work, but it...
Thanks, that’s what I wanted to know about the adjustment! I keep the gear oil topped off fastidiously. I need to keep this gearbox together for...
Arms and ball joints and tie rod ends are all new, as are the control arm bushings and shocks. Everything is tight except the steering gear. The...
I was under the impression that the threaded feature was not an adjustment. While I suspect that it might have that effect, I’d rather know...
I don’t currently have a prop valve. I started off with a manual valve on the rear line, but deleted it while I was troubleshooting the bleed...
I feel like there’s no such thing as a ‘new’ 79 cylinder any more. Aren’t they all pretty much rebuilt cores? I’ve had new brake parts arrive...
I’ve had issues with extra pedal travel ever since I did the swap. Plenty of braking force, but a little soft after engaging. I even resorted to...
Hey comrades, my 1974 steering gear is getting a little bit sloppy. If there were a decent replacement available, I’d happily whack a new one in...
Blergh! I’m replacing my relatively new MCylinder and booster, because I haven’t been able to diagnose a spongy pedal issue, and it appears that...
Thanks. I’m working on making one with sheet metal just as an extended mudguard apparatus, because I’m tired of pressure washing the inside of...
Hey all, lookin for left side control arms, lower especially. I’ve noticed that these sell pretty quickly when they come up on eBay, but hey,...
Well, this sure is a shot in the dark, but I’m on the prowl for some front fender liners. I’m aware that these might be chasing hens teeth, but...
Separate names with a comma.