Damn - I've posted this project in the wrong section! I'd like a Moderator to move this to the 1989 - 1995 section. I obviously wasn't looking...
Doors in primer: [img] [img] Rear fender flares: [img] [img]
Rear reflector holes plated over, filled and sanded. Note the seam between the rear valence and side is deleted for a smoother look: [img] [img]...
Some pictures. Bed work - it is sitting askew, not bolted to the frame: [img] [img] [img] Inner wheel wells: [img] [img] [img]
Update! The bed is 80% filled. Both sides are smooth and level - I took my trusty steel flat rule with me during today's visit, looking for dips...
I didn't go to the bodyshop today, as I need to balance things out between my truck and family. As I'm back to work on Tuesday, it's only fair I...
Fuel filler flap, modified to clear the rear fender flare: [img]
Front fender flares fitted. They are coming off before paint, which is why the rubber gaskets were not fitted: [img] [img] [img] Rear...
Some pictures, relatively late from the time the areas were completed. Bed lid. There are no steel sheets wide enough to stretch the entire frame...
I picked up my custom bed lid yesterday. Very well constructed, once that's locked, the bed will be as safe as a vault. The steel sheet is 1.4mm...
Yesterday, I spent half the day at the bodyshop. The rear fender flares have been trial fitted, so all the holes are in place where they need to...
Update: My 11-day vacation officially started today. Not a vacation of travelling, seeing different places, getting embroiled in diverse...
Some more: [img] [img] [img] [img] [img] [img] [img] [img] [img] [img]
Today, things really moved up a notch. The front half of the frame was cleaned up, and under sealed. I removed the oil pan bash plate, it was...
The old rear differential e-locker harness. It's actually broken in two ares, and the same wires, all parted company. I don't think it's even...
Separate names with a comma.
