the vents do just pop off...they might feel like you're going to break them, just take your time. when i took mine off for the first time i was...
got a pic of this installed? i like the idea of the more/less hidden light until the brakes are hit
i've never been a fan of the high rise but i have a set of the led's from a chevy on my roof...took a little bit of work to cut the plastic casing...
if you manage to find one from a taco could you pm me and let me know how it goes. i'm wanting to replace my vinyl just because it's torn in a...
i have the same problem with mine. the driver side fender was replaced years ago and since i've had the truck, i couldn't manage to get the gap...
i've been told "peel & seal" from lowes is just as good, if not better and it's a couple dollars cheaper...at least in my area Shop Peel & Seal...
awesome...thanks man
anyone know if a 92 2wheel drive dash will bolt into a 94 4x4 without any mods??
here's one better...an HD vid! I don't have a camera other than the crappy one on my phone. YouTube - 3rd brake light it's dirty and still...
i recently fitted a GM led strip up there on my 94. just filled in the holes with some tiger hair and bondo. if you end up redoing your...
I put LED's in my cluster, temp gauge, license, and 'city lights' Unfortunately I ordered 1 less 194 bulb so my cluster isn't evenly lit but...
you'd have to work it to make it fit how you want. most likely, cut a piece out, weld it in and smooth it all out like you would with any sheet...
probably go to the local junk yard with some cordless shears and just take a piece from any car you can find. I know around here, I always see...
it has been done... superbrightleds.com here's a post from another site with the same question:...
Separate names with a comma.
