Recent Content by nevadajh

  1. nevadajh
    Post

    84 single cab short bed

    No real updates lately been busy with family, work, and now the Holidays. Hopefully next week I will get back to work on my truck. Hope you all...
    Post by: nevadajh, Nov 24, 2010 in forum: 1984-1988 Build-Up/Project Threads
  2. nevadajh
    Post

    84 single cab short bed

    No the intake tube never seems to get hot. I dont think there is a whole lot of room for heat to get trapped in my engine bay with the fender...
    Post by: nevadajh, Nov 9, 2010 in forum: 1984-1988 Build-Up/Project Threads
  3. nevadajh
    Post

    84 single cab short bed

    So I got started welding in the 1x2, so far looks pretty good. Once all the rockers have been done I will do the bed sides, then vertical braces....
    Post by: nevadajh, Nov 7, 2010 in forum: 1984-1988 Build-Up/Project Threads
  4. nevadajh
    Post

    84 single cab short bed

    Well I took a few days off to spend time with family, plus I ran out of gas for the welder. So today I started making the inner bed frame out of...
    Post by: nevadajh, Nov 4, 2010 in forum: 1984-1988 Build-Up/Project Threads
  5. nevadajh
    Post

    Sickest '84-'88, Post Your Pick.

    Do you ever plan on bodydropping it?
    Post by: nevadajh, Oct 31, 2010 in forum: 1984-1988 Build-Up/Project Threads
  6. nevadajh
    Post

    Sickest '84-'88, Post Your Pick.

    Same truck with a makeover! I think I like it better blue? [IMG] Uploaded with ImageShack.us
    Post by: nevadajh, Oct 30, 2010 in forum: 1984-1988 Build-Up/Project Threads
  7. nevadajh
    Post

    84 single cab short bed

    Finished up welding and cleaning the bed mounts today, and thought I would have some fun on see how things looked so far. [IMG] Uploaded with...
    Post by: nevadajh, Oct 29, 2010 in forum: 1984-1988 Build-Up/Project Threads
  8. nevadajh
    Post

    84 single cab short bed

    Today I removed a small lip from the inside of the bed rails. This is done so that I can have a flush surface to weld my 1x2 steel tube to. The...
    Post by: nevadajh, Oct 28, 2010 in forum: 1984-1988 Build-Up/Project Threads
  9. nevadajh
    Post

    84 single cab short bed

    Thanks me too!
    Post by: nevadajh, Oct 28, 2010 in forum: 1984-1988 Build-Up/Project Threads
  10. nevadajh
    Post

    84 single cab short bed

    Get in line, I have already promised them to someone when I am ready to sell. I am amazed at how many people have asked me to sell my SR5s.
    Post by: nevadajh, Oct 28, 2010 in forum: 1984-1988 Build-Up/Project Threads
  11. nevadajh
    Post

    84 single cab short bed

    Today I made the bed mounts, not really that difficult just some 2 inch tube cut to length and some washers welded on the ends. The pic only shows...
    Post by: nevadajh, Oct 27, 2010 in forum: 1984-1988 Build-Up/Project Threads
  12. nevadajh
    Post

    84 single cab short bed

    It really was hard to cut up, the bed was perfect not a dent. But Ill get over it when I'm done.
    Post by: nevadajh, Oct 27, 2010 in forum: 1984-1988 Build-Up/Project Threads
  13. nevadajh
    Post

    84 single cab short bed

    Not much progress done today. I was originally going to keep the stock fender wells but now I am going with custom tubs with the stock floor. I...
    Post by: nevadajh, Oct 25, 2010 in forum: 1984-1988 Build-Up/Project Threads
  14. nevadajh
    Post

    84 single cab short bed

    Today I removed the floor from the bed. All I did to do this was make a line around the edge of the floor as close as possible to the bed sides....
    Post by: nevadajh, Oct 21, 2010 in forum: 1984-1988 Build-Up/Project Threads
  15. nevadajh
    Post

    84 single cab short bed

    So today I am beginning the body drop of the bed only for now. I am going to maintain the stock floor but not the bed sides. So while I am going...
    Post by: nevadajh, Oct 19, 2010 in forum: 1984-1988 Build-Up/Project Threads