I'm running jeep take offs with 195/65/15's, mild stretch and almost identical diameter to the factory 205/70/14's
All those cams gnarly listed are way small for a street truck. From my research 20R heads have a slightly smaller cc volume (80cc vs 82cc) and...
@ white trash: I am looking for those but old yota 2wds are hens teeth here in interior Alaska. @1Uz yoda: Thanks! Also I like that truck! Swap...
I have a holley 500 2bbl off a circle track car. Probably buy a new one though as this has the choke tower removed and power valve delete. I...
Not much news on the truck, had a baby and got a new house though! Worked on the front end and mounted the Jeep wheels. Has a little rub at full...
Get a battery box and bolt it in the bed?
I have decided making real power with the little R will be too expensive. I am going to do a budget mild hybrid and swap if I get bored with it....
Could be a plugged pilot jet/ idle circuit
Gas out the carb sounds like timing may have jumped, I would test the ignitor, and pull the valve cover, rotate to tdc and see if the cam lines...
Im running a weber on a stock elec pump in a '79. Works fine but was assembled terribly from the manufacturer, I would recommend going through the...
@First80toyota: Yes for the 22R lower end I was just going to use the 20 in which case wiseco forged is the only ones I can find. @Raffaelli: I...
I have a 79' 20R, de smogged, long tube header, ported intake, 32/36 weber, msd coil+wires. Mated to a 5 speed. No one in interior Alaska wants to...
You can get tube control arms for the front, Sway-a-way makes beefier torsion bars or you can use one ton bars. Belltech makes drop spindles and...
I haven't, but you could use a snorkel adapter and just run flexible hose or bend exhaust tubing to outside air. Or cut the hood and add a spacer...
Separate names with a comma.
