Recent Content by carinaguy

  1. carinaguy
    Post

    Disc swap in progress

    THorn, If you are interested in the steel rims from my '76, shoot me an email. [email protected] I had been using them for rollers, but now...
    Post by: carinaguy, Apr 21, 2021 in forum: Pre-1975 Build-Up/Project Threads
  2. carinaguy
    Post

    Disc swap in progress

    You won't find one because it doesn't have one. The proportioning is built into the master. What most people assume to be a proportioning valve...
    Post by: carinaguy, Apr 18, 2021 in forum: Pre-1975 Build-Up/Project Threads
  3. carinaguy
    Post

    Disc swap in progress

    It sounds to me like you have a mismatched master cylinder/caliper piston ratio. What is the bore size of your master cylinder? Or at least do...
    Post by: carinaguy, Apr 16, 2021 in forum: Pre-1975 Build-Up/Project Threads
  4. carinaguy
    Post

    Project-D

    True, the 4runner has 4 link and coils, but the panhard rod does the same thing in either setup. Poly bushings help prevent sway more than trac...
    Post by: carinaguy, Apr 6, 2021 in forum: Pre-1975 Build-Up/Project Threads
  5. carinaguy
    Post

    Project-D

    Knowledge is power, but Toyota already engineered it. Every 4runner has a panhard bar. Cut out the brackets from a 4runner, copy the geometry,...
    Post by: carinaguy, Mar 30, 2021 in forum: Pre-1975 Build-Up/Project Threads
  6. carinaguy
    Post

    1974 Barn Find RN22 Toyota Hilux

    Took a second to look this up because I was a bit surprised that they might be available. Like I said, I have had to make my own for a couple...
    Post by: carinaguy, Nov 16, 2019 in forum: Pre-1975 Build-Up/Project Threads
  7. carinaguy
    Post

    1974 Barn Find RN22 Toyota Hilux

    The thing holding the glass to the track is just a rubber strip. It is held tight by compression only. Adhesives are not recommended. The strips...
    Post by: carinaguy, Nov 12, 2019 in forum: Pre-1975 Build-Up/Project Threads
  8. carinaguy
    Post

    1976 Hilux

    I may be late on this thread, but don't forget you need the flywheel/bolts too. Your auto transmission has a flex plate, not a true flywheel.
    Post by: carinaguy, Nov 30, 2018 in forum: 1976-1983 Build-Up/Project Threads
  9. carinaguy
    Post

    1971 fj40 landcruiser

    Nice work, looks like you are being very thorough! LandCruisers are some of the highest valued Toyotas anywhere. Done right you should get good...
    Post by: carinaguy, May 24, 2018 in forum: Pre-1975 Build-Up/Project Threads
  10. carinaguy
    Post

    1978 Pickup RestoMod - 3rz swap??

    Post by: carinaguy, Feb 10, 2018 in forum: 1976-1983 Build-Up/Project Threads
  11. carinaguy
    Post

    Perkolator's '75 Hilux

    Don't carve up your hood until you see if the original ones are there. They are little, and easy to miss, but they mount in the cowl and poke up...
    Post by: carinaguy, Jan 11, 2016 in forum: Pre-1975 Build-Up/Project Threads
  12. carinaguy
    Post

    94 flatbed 2.4l with dually setup question

    That looks very much like an adapter setup on a stock 1/2 ton axle. If it were a full floating (true 1-ton) it would have the hubs protruding...
    Post by: carinaguy, Aug 18, 2014 in forum: Suspension/Chassis
  13. carinaguy
    Post

    71 Toyota Hilux Shop truck restoration

    Check out the Landcruiser turn signal housings. I think they must be very similar. The stand might need tweeking because the Landcruiser fender...
    Post by: carinaguy, Nov 10, 2013 in forum: Pre-1975 Build-Up/Project Threads
  14. carinaguy
    Post

    toyota T100 suspension discussion

    I have been wondering the same thing about hubs and spindles, but going the other way too. I have a T100 I would like to convert to 5lug and use...
    Post by: carinaguy, Jul 27, 2013 in forum: Off Topic
  15. carinaguy
    Thread

    69 hilux $300 Blanding, Utah Craigslist

    Not mine, just found it this morning. 80 Courier, 69 Toy, 81 Luv Blanding is near the four corners area. No room for another long term...
    Thread by: carinaguy, Jan 17, 2013, 0 replies, in forum: Exterior/Body