Thanks for all the help/advice everyone. It took me longer than expected but I got the job done. I was able to avoid using any type of puller by...
Glad you said not the fork type since I was going to get one of those in about an hour. What tool should I use instead if the mallet doesn't work?
So....... After taking off the cross member and all the bolts to the pan I tried to wiggle it in 10 different ways with no avail. I looked up what...
Thanks for the feedback. I'm going to go tackle this job now. I'll let y'all know how it goes.
good enough is exactly what I was thinking. Sometimes being resourceful is good, sometimes not so much. I guess I would say I ended up in the...
Got those torque specs handy? And I've never heard of a drag link before so thanks for bringing that up. I'll look up the part and see if I can...
Hey everyone, I want to replace my oil pan gasket on my 92 Toyota pickup but wanted to know if there was anything special I need to know believe...
Well I can't go back now, besides it's an easy fix if I wanted to buy some new leaf springs in the future. Everything is riding straight and there...
Basically. But all is well. I ended up taking the steering wheel off and put it back on and now it matches the direction of the wheels. As far as...
That's my next move. But of course I stripped the screw at the bottom of the steering wheel trying to remove it. As far as removing it and putting...
1992 base model. 4 inch blocks in the rear and 2 and 3/4 t bar drop in the front. 17 x 9 mustang cobra wheels.
I just took a measuring tape to the wheels and they both checked out to be basically the same gaps on both sides of the wheel using the wheel well...
I love this website. I have the same problem but with a little help from guys with more experience I find most issues to be handled in my garage....
This makes sense but at the same time I did the drop in the rear before I took it to the alignment shop, wouldn't the mechanic have seen if the...
Separate names with a comma.