I have a 1994 22re Xcab hilux and working on upgrading my stock clutch. The problem is the upper housing 17mm bolts are hard to loosen and more particularly the one on the driver's side . I was excited to work the clutch but now im fukn bummed that I cant get it out. Your expertise and advice is needed. TIA
My recipe for that is: 1) drop the trans x member to allow the engine to tilt back and allow more clearance. 2) 17mm socket 1/2" drive 3) 1/2" universal 4) about 2 feet of 1/2 extensions 5) 1/2" breaker bar 6) lots of cussing
17mm ratchet box wrench worked for me make sure its the ultra ratio click type you have no room for wrenching there