so im in the beginning stages of adding power steering to my truck and am just about done gathering parts. the last thing i think i need is the p/s crank pulley that bolts to the front of the other pulleys, anyone got one that want to sell? what im also looking for is pics of how and where the pump bracket goes on the engine and also how the lines are supposed to be routed in the engine bay. i already know that im going to have to mount the reservoir somewhere else because the spot where its supposed to go got cut out for my engine cage/shock hoops. so can someone who has a power steering help me out with a few pics?
i can tomorrow, i will take pics of how the lines run in the truck, since my motor is still out of the engine bay. and i will look at my motor build pics and post them up tomorrow..
Hey man, sorry for the few days on the pics, i went down on my bike yesterday morning so i was a bit up set, im all good but my bike isnt heres the pics though, if u need more just let me know, also sorry for the small pics i left camera at house.. driver's side frame.. the hose thats sticking up and a bit cracked is just the main drain hose to the pump.. front cooler for PS hoses from gear box to cooler..then cooler to PS resivoir.. lower bracket bolt upper braket bolts to side of cylinder head (3 bolts) left side of engine with just the PSpump mounted on block
awesome man thanks! i dont think i would have figured that out. sorry to hear about the bike, but atleast your ok.
decided to finally tackle this today so im bumping this back up just to make sure i got it right... and i know you envy my awesome paint skills i didnt pull the donor truck apart so im learning as i go. so please tell me if i got a line out of place.
