new guy need bag help

Discussion in 'Suspension/Chassis' started by allencadle89, Jun 20, 2010.

  1. allencadle89

    allencadle89 Newbie

    Joined:
    Jun 20, 2010
    Messages:
    11
    Likes Received:
    0
    hey everybody im new to the site and i just bought a 92 pickup and was wondering what all i need to buy to bag the front besides the bags, tank, comp.,and all the stuff goes with that. I need help with brackets and how to mount and need a trans cross member that let me lay out to any help would be awesome. i know a bunch guys with s10s bagged but didn't know if any diff. and do i have switch to 4x4 bed to run my 18s or just the fenders?
     
  2. yota4life

    yota4life Grand Toyotaholic

    Joined:
    Jun 28, 2009
    Messages:
    3,023
    Likes Received:
    51
    Location:
    lodi ca
    Truck:
    1991 xcab 2wd 4cyl
    On a 89-95 beds are the same. You'll need upper an lower bag brackets. You'll also need to cut out the hump thing on the front of the frame then plate it up. Tranny crossmember if you wanna lay flat an also a Z notch in the front or you'll sit nose high. Exhaust raised up aswell
     

Share This Page