Lowering Questions.

Discussion in 'Suspension/Chassis' started by KERTWOOD, Aug 20, 2018.

  1. KERTWOOD

    KERTWOOD Enthusiast

    Joined:
    Feb 27, 2013
    Messages:
    215
    Likes Received:
    22
    Location:
    Atlanta
    Truck:
    92 Street Truck
    Does the DJM lower control arm give a true 3" drop?

    Does the Belltech drop leafs give a true 3" drop?

    Thanks.
     
    Last edited: Aug 21, 2018
  2. Clay

    Clay Member

    Joined:
    May 15, 2018
    Messages:
    83
    Likes Received:
    20
    Location:
    Ohio
    Truck:
    93 Pickup
    I have belltech leafs on mine. Overall not happy with them. one side sits noticeable lower in the rear after the install. Their tech support was very unhelpful and seemingly unwilling to do anything. On mine, i would say more than 3" on the belltech leafs. that's with adding the stock bottom bar (the really thick one) on the leaf packs. The belltech leafs were also a tad longer than stock, but still fit.

    I am heavily considering going back to stock leaf packs, but remove one leaf this time.
     

Share This Page