Grill

Discussion in 'Exterior/Body' started by Subscan, Jan 9, 2013.

  1. Subscan

    Subscan Member

    Joined:
    Jan 23, 2012
    Messages:
    65
    Likes Received:
    0
    Location:
    Perth
    Truck:
    Stout 1967
    Hi

    Whats the best way to strip the paint of the grill on my stout back to bare metal

    Been using a wire wheel thats got most of it off.
    But Its not getting into all the tight spaces between the bars and Just sand paper is taking forever!!
     
  2. Rcksqrl

    Rcksqrl Enthusiast

    Joined:
    Dec 8, 2012
    Messages:
    244
    Likes Received:
    0
    Location:
    Boise, Idaho
    Truck:
    '85 4Krawler, '67 Stout
    sand blaster would be my recommendation or soda blaster.
     
  3. Byronics

    Byronics Veteran

    Joined:
    Oct 26, 2011
    Messages:
    408
    Likes Received:
    3
    Location:
    Hilo, Hawaii
    Truck:
    89' Single cab
    maybe a couple coats of this stuff?:shrug:

    [​IMG]

    i used it to take paint off of some rims that i polished cuz sanding took forever. just have to brush it on, let it sit for a couple minutes and then wash it off.

    that's what i used to take the coating off the supra rims that i had

    [​IMG]
     

Share This Page