Bagged trans x-member questions

Discussion in 'Suspension/Chassis' started by Under Construction '93, Apr 4, 2011.

  1. Under Construction '93

    Under Construction '93 Addict

    Joined:
    Feb 14, 2010
    Messages:
    979
    Likes Received:
    12
    Location:
    Riverside,Ca
    Truck:
    1993 Std Pickup
    I'm baggin' my '93. The plan is to modify the factory one to work rather than cutting it out and making a new one. Has anybody else done this and have pics? Was going to cut out the center section and weld flat plates and make a removable center section with raised mount. Any tips or suggestions would be very helpful. Thanks in advance.
     
    Under Construction '93, Apr 4, 2011
    #1
  3. layedout94

    layedout94 Enthusiast

    Joined:
    Dec 29, 2010
    Messages:
    193
    Likes Received:
    0
    Location:
    aberdeen
    Truck:
    94 toyota hilux
    mine has been replaced with a custom one i think it might be easier
     
    layedout94, Apr 4, 2011
    #2
  4. SD YOTA

    SD YOTA Grand Toyotaholic

    Joined:
    Jan 30, 2007
    Messages:
    3,585
    Likes Received:
    30
    Location:
    san diego
    Truck:
    2000 Toyota Tacoma 2wd
    ive seen it done this way.......

    [​IMG]
    By alisn4x4 at 2011-04-05
     
    SD YOTA, Apr 5, 2011
    #3
  5. yota4life

    yota4life Grand Toyotaholic

    Joined:
    Jun 28, 2009
    Messages:
    3,023
    Likes Received:
    51
    Location:
    lodi ca
    Truck:
    1991 xcab 2wd 4cyl
    Tht one actually looks sik as ****
     
    yota4life, Apr 5, 2011
    #4
  6. Under Construction '93

    Under Construction '93 Addict

    Joined:
    Feb 14, 2010
    Messages:
    979
    Likes Received:
    12
    Location:
    Riverside,Ca
    Truck:
    1993 Std Pickup
    Good lookin on the pic. I'll prob do the same thing. Any other suggestions welcome. Thanks
     
    Under Construction '93, Apr 5, 2011
    #5

Share This Page