anyone messed with weber jets before?

Discussion in 'Engine/Drivetrain' started by JOE_1985, Jan 24, 2010.

  1. JOE_1985

    JOE_1985 Veteran

    Joined:
    Feb 13, 2009
    Messages:
    303
    Likes Received:
    1
    Truck:
    87 custom
    i aquired a 32/36 from craigslist for 50 bucks, only thing is it was on a 4.0 liter jeep.

    so does anyone know the jet that was stock for the 22r for the weber and/or what would be best with a trd stage 1 cam and a header
     
  2. 3spd

    3spd Newbie

    Joined:
    Jun 6, 2011
    Messages:
    22
    Likes Received:
    0
    Location:
    Portland OR
    Truck:
    76 SR5
    I am looking for the same information. With some googling I found this: Off Road Toyota Forum - Weber Jetting Timing & Tune-up

    He says:
    Primary/Secondary
    Idles: 70/65
    Mains: 130/150
    Airs: 170/175
    Mixture screw at 2 turns out from seated, maybe a touch on the leaner side.

    I had the most the jets to set my carb up like this but I didn't have the right idles so they are 50/45 right now and when I rev the engine it goes way rich and either bogs down or plateaus then screams depending on how hard I hit it.

    Let me know if you find anything better.

    Ryland
     

Share This Page