88 22re air injection tube

Discussion in 'Engine/Drivetrain' started by Doerr, Feb 17, 2010.

  1. Doerr

    Doerr Newbie

    Joined:
    Feb 17, 2010
    Messages:
    17
    Likes Received:
    0
    Location:
    Sheridan,Indiana
    Truck:
    1988 4x4 4cyl 5 speed standard cab
    I have a 1988 toyota 4x4 5 speed with a 22re engine. My question is, can I plug the secondary air injection tube on the exhaust manifold side. mine is cracked and I just want to block it off as long as it will not effect anything. Thanks for any and all info. I live in indiana no emissions testing...
     
    Last edited: Feb 17, 2010
  2. IronNam

    IronNam Grand Toyotaholic

    Joined:
    Sep 11, 2008
    Messages:
    6,960
    Likes Received:
    14
    Location:
    Kansas -> NorCal
    Truck:
    94 XCab
    should be fine. EGR can be removed! and go ahead and make an introduction, you're welcome here :D
     
  3. SD YOTA

    SD YOTA Grand Toyotaholic

    Joined:
    Jan 30, 2007
    Messages:
    3,585
    Likes Received:
    30
    Location:
    san diego
    Truck:
    2000 Toyota Tacoma 2wd
    yea....... you can block off your air injection with no hinderance or ill effect ont he motor. welcome to the site if you have any further questions about your truck or what to do feel free to ask away :waytogo:
     
  4. Doerr

    Doerr Newbie

    Joined:
    Feb 17, 2010
    Messages:
    17
    Likes Received:
    0
    Location:
    Sheridan,Indiana
    Truck:
    1988 4x4 4cyl 5 speed standard cab
    I did my intro. Thanks for the replies guys. Can you tell me what all I can remove of the smog stuff and all those vac lines. I would like to remove all of it if I can.
     

Share This Page