dont the 89-95 ext cabs have a bench seat that splits into two seats, a driver with a lil extension and teh passenger seat?
u think they bolt right in the std cabs like the 4runners do? and do they have a flip down console or armrest?
Flip down armrest. They might not bolt up in the std cab. I believe the 2-pc bench has 8 mounting legs, whereas the std bench only has 4. I've also heard that not all std cabs have all 8 mounting holes, mine did. You can still drill them, tho.
I actually just pulled out my 60/40 bench 2 days in a row while working on my sub enclosure. There are 4 brackets on each seat. The seats come out separate as if they were buckets. So 4 brackets on each chair. The drivers bench is wider which is what fills the gap in between the seats and makes it into a bench. On the drivers side there is a flip down arm rest like you mentioned. Don't know about a standard cab... but worst case scenario you would have to drill 4 holes. I have been battling with the idea of keeping these or buckets... They are real comfortable... However buckets would be more roomier. I will probably end up keeping my seats just the way there are.
thanks for the input j10nk exactly wut i needed to hear... 88 u cant jack me even tho i see u lowkey jacking other threads, but im the most wanted around here
