1994 Mini pickup with manual transmission 2 connector ecm pinout

Discussion in '1989-1995 Pickup Discussion' started by EricRedlak, Nov 23, 2022.

  1. EricRedlak

    EricRedlak Newbie

    Joined:
    Nov 23, 2022
    Messages:
    1
    Likes Received:
    0
    I’m having an issue with the #2 injector not getting the pulse from the ecm. I known that injectors are a normally closed system and only sprays when the ecm cuts the ground.
    I have bleed over continuity from the # 2 white wire to a wire that seems to be solid white.
    All I havel seen so far is for AT and not manual transmissions.
     
  2. StorminMatt

    StorminMatt Newbie

    Joined:
    Oct 7, 2022
    Messages:
    9
    Likes Received:
    7
    With the exception of the connections from the ECU to the transmission, the ECU pinout is going to be the same for a manual transmission as an automatic.
     

Share This Page