Phatmitzu, just put the front up on jack stands, go under the truck & their should be 2 bolts under the tranny x -member, all u need is a size...
with the 4" block did u pull the middle leaf spring?? if not do that and it would lower it an 1' more, if u want it even lower, dearch your stock...
with the 3" drop control arms do u rub with the rims you have now or no, reason I ask is my friends 94 is drop with control arms and turn the...
hahahaha yeah thats what I was gonna do, F*ck da rims for now. probally going install my drop control arms and change my block to a 4". I got...
if u just want a 2" drop just torsion it, it'll still ride like stock but if u don't want to mess with the torsion get the spindles, its ya truck...
hmmn right know I got 15" on but planning on getting 17's down the line. my rear is middle leaf off wit a 3" block. whats wrong with just changing...
can u tuck rims with just a static drop using drop arms and torsions also without cutting the inner fender wells. and for the back 4" block w/...
to me like what Twisted says if u plan on bagging it then go with spindles but if you just want to static drop it go with drop control arms... the...
carbon so u are using drop control arms... are u running stock rims or aftermarket.. because for some reason my friends truck is rubbing evertime...
so basically when u reset them it drops 1" then if u want it lower just adjust from the bolt again..:eek:
wait your lowering the torsions!!!. I want to reset them!!.. on my friends truck its already torsion all the way down where you scrape every bump...
the bore for those is the same for all toyota trucks 67.1
sup everyone newbie on this site, everyone probally seen me on yotascene.com well just want to get some advice on resetting the torsions on a...
Separate names with a comma.
