Hopefully you still have your 2J swapped truck.. You figure out front brakes yet? (2 years later, I hope you have ) In case you haven't, I have a...
That power rack thread.. I know it's dead but I'm trying to do something to assist with the drift readiness of this POS.. Am I correct in...
Rant: Thank Honda Tech and a few people on here that I keep SAYING that they're going to do stuff, and I've never seen ANYTHING on it or the idea...
There's a couple things I've noticed over the years, and one that stands out is that most import tuners or people that like to assume such role or...
I think I'm going to change that Sequoia emblem though.. Everyone says SSRS but it's SSR5. you know Super Sport SR5..? Stupid sequoia salting...
It needed some badging.. :) [IMG]
While this is true, think about the curb weight of a crown vic that's designed to be fully loaded with all the police equipment and supposed to...
IIRC it was about $40 ea for rotors, $45 + $20 core for calipers (You can sometimes get away with returning your stock calipers for core even...
Well, I'm sorry for being gone for so long without feeding you guys some much needed input. Simplest things first. As for the bracket. It's...
I was up under there looking at this setup last night.. Not trying to undermind your deal but it doesn't appear that this fix was thought...
Running a power box without pressure isn't recommended. Not only are you moving the servo in the box without fluid, but you're also stressing the...
AFAIK, The 2wd from 79-95 are all the same width. The only thing that changed was the pinion depth from the axle CL between the 7.5" and the 8"....
The OE specifications are not based on thread length or anything relating to position of the torsion key.. They're based solely on ride height...
The OE specifications are not based on thread length or anything relating to position of the torsion key.. as they vary depending on sag, weight,...
IF you're like me when I was looking for options to upgrade brakes, and you stumble across this and you don't wanna spend $5,093,470,378,209,873...
See, here in-lies a bunch of hear say.. From what I've gathered, all the 8" truck diffs have the same bearings with exception of the very...
so, now that I have this out of the way.. I'm thinking with all that power up front, I need to put it to the ground.. I'm starting off with a...
the crown vic bracket is what the caliper attaches to and supports the brake pads. there is a bracket that must be made of 5/16" plate (if you're...
You know.. I didn't realize there were so many different boosters for these trucks.. There's a 9-1/2" Single diaphragm (2wd) 8-3/4" Dual...
ok, so here's the situation.. I locktite'd the bolts on the caliper and the bracket.. Locktite blue. The install and all clearances were...
Separate names with a comma.