The reflector inside of the sealed beam can corrode away, one of mine did it , most of the light from the lamp inside was shining back into the...
I replaced the broken wire connecting the battery ground to a bolt on the inner wing, speedo hasnt done the drop to zero thing since. Guess that...
When I lived in England I had a Lotus Eclat,all glassfibre body, it had plenty of little cracks in the body around the trunk lid, when I found out...
Just read your post again and see what you are asking! - the A/C belt pulley center nut needs to be loosened so that you can loosen the bolt that...
On the 22RE engine the alternator belt is adjusted by loosening the alternator pivot bolt and the bolt that holds the alternator to the bracket on...
mine does that sometimes too, it seems like a bad earth on the instrument cluster
I ended up crimping a 1/4" female blade connector to the wire and closed the connector in a little with pliers and it pushed into the oil pressure...
It was the only hose I hadn't replaced!, I found it by looking at an assembly diagram in the manual - I never knew it actually existed till it split.
Mine started leaking from a small hose that connects from underneath the inlet manifold to a metal pipe next to the block - the hose had swollen...
Coming from England - my 860sq ft house in Bedfordshire was reasonably priced at just under $400,000 !. I probably would be best to rent for a...
I may be moving to Los Angeles due to work, just East of Culver City to be exact. Can I have suggestions of somewhere to live in the area that...
That sounds like a plan 1Sunpro/2 in. 0 to 100 PSI black face black bezel mechanical oil pressure gauge (CP7982) | Oil Pressure Gauge |...
of course when I reconnect this wire I will see how low the oil pressure is at idle!
I noticed that the connector is still attached to the oil pressure switch, I can solder a wire to this and connect back to the bare wire with a...
difficult place to take pictures/get hands to, cant imagine how to change fuel filter !
Its this type pressure switch :- 93 1993 Toyota Pickup Oil Pressure Sender - Body Electrical - Beck Arnley, FAE, Futaba, NTC, Sankei Switches,...
Found it!!!!! the wire was hiding behind the starter motor, the end was bare so was touching against either the block or the starter motor and...
My truck was sitting behind my father in laws garage for a couple of years - had the timing chain worn through the case into the water pump...
The wire connecting to the oil pressure switch on my 93 22RE is missing - I cant find it anywhere! which part of the wiring loom does it come...
Nice to see someone from my homeland! Makes me miss England :cry:
Separate names with a comma.