Yes I’m seeing some dripping out of the exhaust on startup. I am in Oregon and it’s currently around 35-40 degrees outside. I tried my best to...
So I just got my head rebuilt on my 75 pickup. Installed head with a stone head gasket. Put a Weber carb on. Installed Egr block plate and Egr...
You were darn right about the adapter plates. Can’t keep the thing idling because of the leak.
I ended up cutting the barbs and got it off with a socket. Bought a 1/2in-3/8 barb fitting and ran the pcv there. Thanks for the help! I just got...
kay thank you!! I’m glad to know this now. I’m a newbie to carbs this is my first carbureted vehicle. I’m going to have to cut the barbs off to be...
Are you talking about the one on the very left of the picture (brass two ports) or the one with the white end that the distributor used to connect to?
This is before I took the vacuum connector out. So you think a bigger port would be better? Also yes I heard about these adapters failing was just...
Thank you! This is what I did and the 90 degree t that came off of it I put a rubber cap on and pipe clamped it.
After doing a lot of digging around I saw that someone put it here (where my finger is pointing). Should that be an alright spot?
Alright so I am trying to install a Weber on my 75 pickup. I have no idea where I’m supposed to connect the pcv valve. In the stock carb it...
Okay so I just got my head rebuilt and I decided to buy a Weber carburetor. My problem is that I bought an electric choke Weber carburetor and my...
Fingers crossed because parts are getting extremely hard to find for this truck. I’m going to try and bend it back best I can. Thank you everyone...
Thank you for your input. It is not a moving part are you sure it will throw the alignment off? It’s just going to be a really hard part to find...
Thank you!!!
Dang Jack slipped because of rough driveway and bent this part. Anyone know if I can just try to bend it back the best I can or if it needs to be...
Thank you
Does anyone see the photo?
IMG_0801 by Minitrucker posted Sep 17, 2024 at 11:09 PM
I’m not sure if I put the clips and springs on correctly. Last set didn’t have clips. I put the clips and then the springs. I will post a photo as...
Separate names with a comma.
