Back to working on it, parts are getting hard to get! Finally found an intake gasket, if it ever stops raining again, I’m pulling the intake to...
Trying to find new rear brake shoes for my 82 SR5 4x4, Toyota says they are discontinued, all of the auto part places say they can’t get them...
Blew $300! Yeah, it checks OBI, but will not show data. Needed a new one anyway I guess, as my old one was about 10-15 years old anyway. But did...
Found an OBD1 scanner that shows more than just codes, $300! Ouch! When I already have an ODB II scanner. Never thought I would need an ODB I....
Got it back together, idle is lower, but still too high. Cut the throttle cam off the old carb, and adapted it to the throttle body. Truck has a...
Found the problem, they made the bottom adapter plate too wide, I was checking the plane and fit, and noticed it overlapped the flange on the...
That’s what I’m thinking. The adapter is about an inch and a half thick milled aluminum. I used a thin layer of form a gasket to hold the paper...
Thumbs down on Affordable Fuel Injection, too many issues for the price. Went to hook up my scan tool, found out the connector is a OBD1, which is...
Decided to delete the mechanical fuel pump, I think the system is building too much pressure, hence the return line blowouts. Now using just the...
Finally got everything put together, header is on, but the O2 sensor is down near the cat now, so the fuel injection wiring for it is about 3’ too...
Should have changed this thread over to the build section, but too late, unless one of the mod’s want to move it. Got the cables ran today,...
Will need to mill a notch out of the adapter plate, it overlaps one of the egr intake bolt holes.
LCE finally returned my call, said it would be another four or more weeks for the header. They said they had a run on them, and had sold 50 in the...
Not real happy with LCE, ordered the header at the same time as I ordered the Fuel injection from Affordable, Affordable said 4-6 week lead time,...
I don’t know if Toyota’s choke works the same, but on a lot of American vehicles, to set the automatic choke, fully depress and release the gas...
https://affordable-fuel-injection.com/
https://affordable-fuel-injection.com/wp-content/uploads/2019/09/TBI-INSTALLATION-INSTRUCTIONS_v10.pdf
Got started on it, there is a few hiccups, the instructions are generic, not vehicle specific. Only one of the four hold down bolts is the correct...
Reading through the instructions, it’s a tbi for a 90 Chevy 5.7 V8. Doesn’t look like too hard of an install. Ripping out all the old vacuum lines...
It came in today, looks like they tuned a throttle body off a V8! The thing is huge!
Separate names with a comma.
