My progressive was doing the same thing. Adjust the IDLE MIXTURE screw to a leaner setting! No problems after that. ....Mine still runs a...
I don't know about you area but I live in Hawaii so salt breeze 24/7 365. Patched up all the rust and new paint job on my truck about 5 years ago...
I think the rims are the same bolt pattern. If anything the center bore is smaller. So either spacers or machine the center out.
Before you hack your bed up, there are no differences between beds on 4wd and 2wd trucks for 89-95. They are exactly the same. (In US anyway) Only...
Should be a port on the intake manifold. What engine is in it?
There are a few people on here that swapped a 2rz in their trucks. One was a drift truck. Try doing a search on here for "Drift Truck" ....
Definitely short bed you can tell by the inner bed pannel in the first pic. See the square in the front end of the inner bed pannel, on a long bed...
Most cheapest way would be to do a flip kit, but no one sells one so you'll need to fab one up. On 4x4's the thickness of the leaf pack affects...
try messing around with the idle mixture screw.
The straight pipe or the pipe that goes from the catalytic converter to the muffler needs to be trimmed. They make that pipe long so this kit can...
It will run fine, well mine does and haven't had a problem yet. Won't run to it full potential but it'll run and drive fine day to day. I feel the...
Not sure if this will help but the same extended studs that are used on 89-2000 honda civics fit on our trucks.
Yeah there dosent seem to have and stress cracks or things like that . And its an 84-85 axle with the truss under. Thanks for the advise . The...
I kind of like the 5 spoke but the chrome matches better
I got a solid axle housing from my buddy to build and do a SAS on my truck. I still need to get knuckles, a 3rd member, axle shafts and everything...
Most single sidedraft manifolds are for 20r heads. Don't see to much for 22r heads...
Yeah everthing from the 2wd bed will work, mounting is same also. Only difference is the fender section is wider.
Do those LCA's fit for second gen toyz. On summit it says for 88-94...
I found a sight, but is in Europe...
If you plan on putting any power under your hood and beating on it the stock 7.5" rear end is gonna have to go..
Separate names with a comma.