Hi everyone. I am looking to lift an '92 extracab 2WD pickup. Who can advise me? I'd like it the stock height and tire size of a 4Runner or 1st...
Hey all. Wondering if the seatbelts from the rear of an Xtra cab can be used in the front. The rear ones are never used, and the front retractor...
Ended up replacing the PS pump with one from a junkyard. Works great now. The old pump was missing parts.
I clearanced the passenger footwell and moved brake lines, electrical wires and fuel lines. I need to make the EGR and reed valve tubes fit the...
I rebuilt the power steering pump with a seal kit. We'll see how it goes. There weren't any ball bearings like in the instructions. It was missing...
Hiy'all. When I did my auto to manual conversion, my new R155 transmission had the connector for the skid control sensor snipped off. Part number...
Can someone confirm that standard cab doors are interchangeable with extra cab doors? I recall a post stating that they weren't but I found...
Hi. I am in the process of changing head gaskets on a 3.0 as well as rebuilding the power steering. Has anyone deleted the vacuum line going to...
Just to close up this thread, the ECU was left as is. Apparently all I needed was the overdrive switch plugged back in because the ECU was...
On the ECU, looking through e-bay I see that the one specific to my 1992 is: 89661-3573 Apparently these others will work as well, but I'm not...
I know the stock sizes are 14" x 5" or 15" x 6" for the alloys with a 20mm offset. What is the minimum/maximum offset that will fit without...
Can you list the years and models with an ECU that will work? I'm on a search for that now.
Thanks for your reply. I discovered this and used the entire clutch/brake bracket and pedals from a manual transmission truck of the same era....
Congratulations Orlando. Please define "everything". What transmission did you use? How did you deal with the driveline spacing and mounting?...
Just about done. Having trouble with the clutch line. I pulled one from a 4Runner, but it leaked from the master and the slave connections....
If anyone can take a picture of the bracket and clutch/brake pedals either in place or out of the truck, please post it.
I ended up using an R150 transmission and have just about everything in place for the conversion. The clutch pedal, however, does not seem to...
I am doing an auto to manual swap. 1992 Xtra cab 3.0 6Cyl with a A340E auto to a W59 manual. I need to know the driveshaft length on an x-cab...
Hiy'all! It's a sunny day here in the bay and I'm about to get more grease under my nails. My first truck was a Stout and I drove it daily for...
Separate names with a comma.