I'm selling this 76' toyota Chinook in the San Francisco area. It is running but will need to be towed. Head gasket is blown. Tons of new parts....
Hey there! Do ya happen to have a manual window regulator for a 76' toyota pickup? (Driver side)
Thanks guys for your help! Solved one of the issues. It was the valve adjustment. I knocked them down to .007 and .011 and that seemed to do the...
I recently just put an old 20r I got from a salvage yard into my 76 toyota Chinook. Everything is running just fine on it except I'm getting a...
Thats the thing though my first intake was off as well and I actually cracked the first intake because it was off and now the second intake is off...
Hey ya all! So I recently brought an old 20r cylinder head in to get rebuilt to a machine shop. Once getting it back, installing it, and...
Thanks Fred for all your help!
Thanks for all your knowledge bud. I didn't blow out the holes before. Is there anyway to check for a cracked block specifically with the head off...
Ok thank you! How can I go about checking those water jackets? If I had a cracked block would that more than likely be able to be seen from the...
Would that also allow water to get into the oil? I ended up pulling out almost 3gallons of oil/water from the oil pan. The block was bought from a...
Hey ya all! So just two weeks ago I decided to do a 22r block 20r head hybrid build for my engine. This was my first time messing with the engine...
I just recently put in a newly used 20r engine in immaculate conditioI just recently put in a newly used 20r engine from a 1980 celica in...
After 3 days I finally figured it out. Apparently, when I damaged the vacuum advance and went into the distributor to take it off my screwdriver...
I don't have any spark at all. I just replaced the coil and the control module. Still no spark at all. I got power going through it but no spark....
Yea I did. Today I isolated the ignition coil and control module and tested that. There is no spark from the coil. I replaced the control module 3...
Hey thanks for reaching out. So it cranks up the starter is working, fuses are good (just tested all the fuses and the ports for the fuses, and...
Hey! So, I just did an engine swap on my 1976 toyota pickup . I'm almost all finished but I don't have a spark. The truck turned over earlier but...
I tried that to start with that, but it didn't start. It is from a pick'n pull, so I wondered if I was missing a necessary vacuum or if there's an...
Hey there! So, I have a 76' toyota chinook (pickup) my buddy talked me into swapping out my carburetor for a weber 32/36 electric choke carb....
Erick561 how much for that exhaust manifold bud? Do you have pics?
Separate names with a comma.