i did mine just by removing the crossmember and left the sway bar in place. not much to worry about with a 22re oil pan most of the engine is just...
i think the best thing would have been to find a 5 speed trans with cable driven speedo and then using an sr5 cluster with cable drive speedo.. i...
tach wiil be a single wire ran straight from your ignition coil harness straight to the back of the cluster. oil pressure gauge needs the correct...
post some pics
pretty clean
7m may be better option from what I gather. shorter in length end to end which means better fitment and not so complicated when it comes to...
7MGE would probably be the easiest based on all the info I have gathered. Im looking into this as well and so far have narrowed it down to either...
THIS TRUCK RIGHT HERE :headbang:
Id take it back to the alignment shop and tell them the steering is off. Adding blocks to the rear suspension wouldn't mess with your steering or...
Are Starion/Conquest wheels considered current?? I always liked how those wheels looked on these trucks.
aw sheeit taking it way back...lol thats awesome though what happened to the truck?
those look cool
looks good
heres a couple things you might want to consider
I wanna say if you have hard brake pedal and no brakes that usually means the booster is bad... if your pedal goes to the floor and no brakes that...
It may not be an Air problem if you are certain there are no vacuum leaks. maybe electrical?? Fuel??
Yeah it took me a while too i think i spent like 3 hours carfully removing the gear rod on the odometer just to correct the milage... god im glad...
Can you adjust your idle via the idle adjustment screw on the throttle body to compensate for the low idle?? If you did what rpm is your idle and...
heres a video about the front crank seal [MEDIA]
oil pump/front crank seal is a common leak other than valve cover and oil pan. There is a tsb on the front crank seal where you gotta use a...
Separate names with a comma.