I recently acquired an s2000 for a motor/transmission swap. During the tear down, I noticed the springs that were in it (Eibach) were the same...
The 2wd Nissan hubs use the same bearings as the 2wd Toyota's. You'll run in to a couple of obstacles though. The first is the spacing. The...
That is very true. LS is light. Older SBCs are pigs. haha
An LS isn't all that heavy in terms of engine weight - especially considering how heavy the iron block 8/18RC's are. Those old Toyota 4 cylinder...
49 months apart. Nice setup though.
I've got 4.10s now. If I end up doing a swap, I don't want to be geared too tall so probably. 3.90 or 3.73.
In an effort to consolidate any info I find on the conversions, here are a couple of links for some of the options I've found. Again, the are...
I know I've read it somewhere but can't remember when Toyota decided to ditch the G-code (8") for the F-code (7.5"). I think it was late 70's....
From what I understand, the brackets allow the V6 calipers and rotors to be used on the rear of just about any 7.5" or 8" toyota rear end -...
I'll do that. Thanks for the lead.
I've been working on my 1971 since winter grabbed Utah by the nuts. I sourced an MKIII Supra LSD which is in the process of a rebuild (Weir...
I know for a fact (I took it apart to mount an MKIII Supra LSD in it) that my 71 is a G-code and has 30 splines.
I've been contemplating the same swap into my 71. Looking at it, there's not much room as Cade01 mentioned. I know there are alternator brackets...
Im trying to figure out a rear disc setup but until then, I need a drum backing plate from a 1968-72 Hilux. I'm not sure if a 72-77 one would work...
That's pretty cool! Simplifying is always better. I only went with my option as it was relatively inexpensive. Before the electronic...
I ordered an electronic distributor for a 12r motor. I had to do two things to get it to work. 1.) swap the gears. The 12r has gears cut in...
Yeah, the spindles/brakes are a direct swap. My truck has the discs from the 2nd Gen on it.
The 1st gen. trucks are an oddity. They don't resemble ANY of the other generations in look and style. The body parts will NOT interchange with...
I wasn't able to take a measurement but after looking at a side-by-side of my 71 next to a friend's 75 (I think), The size and shape look almost...
I've been swamped at work lately so I haven't tracked the issue down yet. That said, I did find out that some old Toyotas (FJ40 in particular -...
Separate names with a comma.