Can i use any universal bolt-on mini notch, i will have it welded eventually. Not looking to cut bed, just wanting to slam my truck as much as...
There's no one around in a 128mile radius that Caries it and I need it done by sat.
I'm trying to recover my vinyl headliner with suede but it's not sticking fully. I have tried 2 kinds of spray adhesive automotive( specially...
I don't quit remember the model, I would need to look for my receipt from back in 05. I've also had contitech for about a week on my blazer once...
I used to run firestones with shocks then switched to slam bags and removed shocks, slam bags rode better
There's really not much we can do on these single cabs lol, have you thought about maybe going with bucket seats?
Nice should get loud, those can get low and loud. Try emailing DD and ask them what's there recommended box size(cubic ft) per sub and see how...
The only results I get are putting 4wd or 4runner valances on 2wd, on ebay it shows 89-95 are same bumper. I have a 91 and wanting to put 92+...
I'm pushing around 1000watts to the pair, have them wired down at 1ohm on a hifonics Brutus brx2000.1d. Are your DD 1008s or 1508s
Yes still have bench seat nd I had to move seat forward
Yea sits ontop of tran tunnel. I was gonna go to the floor but my bass amp didn't fit under the seat so it's mounted under box on one side and on...
I just did a box for mine for 2 8" soundqubed hds208 and I got about 1.85cu after sub displacement tuned to 33hz using a DIY aero port. I had them...
Are all 89-95 2wd front bumpers the same? I know grille and valance switch of at 91 is it the same for bumper?
Had a similar problem, mine was idle screw came loose on tb turned it down and it stopped it. Might want to check screw.
Are you looking to do a blow through set up or install them inside the cab?
i need more amperage than 120 putting big amps plus a second battery
I'm in need of swapping out my alternator(sound system) I've been reading that the Gm cs144 alternator swaps in with minor modifications....
I have a reg cab 91 pickup 2wd on 17" 01 cobra wheels. I will be purchasing a djm lowering kit 3" lower control arms and 4" blocks nd will also be...
Is there any tonneau covers from other trucks that fit a 91 Toyota pickup single cab reg bed?
Separate names with a comma.
